For measuring absorbance in microplate-based assays 800TS Absorbance Microplate Reader (800TSI)

Bio Tek Instruments Synergy LX Multi-Mode Reader is a low cost, easy to use, multi-mode reader addressing the most common endpoint microplate based assays SYNERGY LX Mulit-Mode Microplate Reader (SLXATS)

For biomagnetic separation and vacuum filtration 50 TS Washer (50TS12V)

Offers dual mode control - runs protocols from PC or instrument keypad Liquid Handling Control Software (LHC2)

For 24-well plate washing 4-well manifold for 24-well plate washing (not for use with ''M'' configurations)

Biotek™ Epoch 2 Microplate Spectrophotometer is available with a color touchscreen interface and cuvette port. Gen5 software included. EPOCH 2 Absorbance Microplate Reader (EPOCH2NS)

Accessory for BioTek ELx50 microplate washer Filter for vacuum line or air inlet

For use with ELx405 and ELx50 Microplate Washers 125ML Solution #2: 10x Concentrate Blue Test Dye.Used for ELx405, ELx50, 50 TS and MicroFill qualif

Provides waste containment 2L Waste Bottle (Without cap)

Full PC control provided by LHC™ Software leads to increased convenience when programming important assay-specific protocol requirements in a familiar Windows™ environment. Fisher Scientific - BioTek Liquid Handling Control Software is ideal for use with BioTek 405™ Touch Washer, 405™ LS Washer, ELx405™ Select Deep Well Washer, EL406™ Washer Dispenser and MultiFlo™FX Dispenser. Liquid Handling Control Software (LHC2SECURE)

For fast processing of 96-well plates X2 8-manifold for fast processing of 96-well plates (not for use with ''M'' configurations)

384-well Ring Magnet

For use with Synergy LX FILTER cube : Red : EX 530/25, EM 590/35 , Mirror570

For use with ELx800, ELx808, PowerWave, Synergy 2, Synergy H1, Synergy H1m, Synergy H4, Synergy HT, and Synergy Mx products 125ML QC Check Solution #1 - Yellow. Used for ELx800, 800 TS, ELx808, PowerWave (all models) and Syn

For ELISA, flourescence ELISA, protein quantification, nucleic acid quantification FILTER cube : Spare LUM

For use with 800 TS Absorbance microplate reader Seiko RP-D10 thermal printer

For use with 800 TS Absorbance microplate reader Accessory door (included with ''I'' configurations)

Used for Synergy LX custom cubes EMPTY filter cube. Used for custom cubes with EX/EM filters and dichroics. Use 708xxxx filters and 7

Accessories for use with the BioTek™ MicroFlo™ Select Microplate Dispenser.  Large volume tubing set : 10 µL increments, 10 µL- 3,000 µL, plastic tips

For use with any BioTek microplate reader with 340nm absorbance measurement capability to evaluate optical systems at 340nm 340 nm Absorbance Test Plate

Sodium Fluorescein Powder (1 mg vial). Used for FLx800 and Synergy fluorescence qualification tests

Provides performance verification for microplate readers. Absorbance Test Plate

Replacement part for MultiFlo FS automated multi-mode reagent dispenser Magnet adapter. For use with MultiFlo FX.

Designed for conducting fluorescence intensity, fluorescence polarization, and time-resolved fluorescence qualification tests on Synergy™ Neo2/H1/2/HTX, FLx800 and Cytation Multi-Mode Readers. Fluorescence Test Plate

16562232 Filter : 760/20nm Filter : 760/20nm

15386196 Gen5 Analysis Software (GEN5IVD) Gen5 Analysis Software (GEN5IVD)

16563042 125mL BioTek 50x Green Test Dye to test reagent injectors on all multi-mode readers during qualifica 125mL BioTek 50x Green Test Dye to test reagent injectors on all multi-mode readers during qualifica

16532192 12-well manifold, with large bore aspirate tubes(not for use with "M" configurations) 12-well manifold, with large bore aspirate tubes(not for use with "M" configurations)

13406399 125ML Solution #1: 100x Concentrate Wetting Agent. Used for ELX405, ELx50, 50 TS and MicroFill quali 125ML Solution #1: 100x Concentrate Wetting Agent. Used for ELX405, ELx50, 50 TS and MicroFill quali

16532242 Filter : 510/60nm Filter : 510/60nm