Honeywell Fluka™

Honeywell Fluka Honeywell Fluka

Hydranal Reagents

High Titration Speed,
Accurate Results

Learn More  

Honeywell Research
Chemicals

Discover Honeywell Research Chemicals Full Range

Learn More  

Safety Data Sheets
Certificates Of Analysis

Find the appropriate SDS or CoA

Learn More  
Featured Products

Top Categories

TraceSELECT™ Inorganics

TraceSELECT™ Inorganics

Our TraceSELECT and TraceSELECT Ultra products for trace analysis at ppb and even ppt levels are produced by sub-boiling distillation.

View Products

Analytical Inorganics

An extensive selection of inorganic laboratory fine chemicals including precious metal chemical compounds and other chemical metal salts.

View Products

Hydranal™ – Karl Fischer titration for measuring water content

Hydranal™ – Karl Fischer Titration for measuring water content

Original and Innovative Karl Fischer Reagents.

Looking to analyze or measure water content?

Our premium Hydranal™ products for pyridine-free and ethanol-based water determination by Karl Fischer titration (KF titration) is comprised of  one- and two-component reagents for volumetric and reagents for coulometric Karl Fischer titrations.

Also available are water standards for titer standardization, pH buffering reagents, special reagents for aldehydes, ketones, and other solubilizing agents.

View Products

Standard Solutions – Buffers and concentrated solutions

Standard Solutions – Buffers and Concentrated Solutions

More than 800 consistently high-quality products including buffer solutions (pH 2.5-10), reagents and additives for complexometric and volumetric titration in glass and plastic bottles.

View Products

honeywell Riedel-de Haën
Honeywell Fluka
Honeywell Research Chemicals
Products

Ammonium Acetate, For HPLC, Honeywell Fluka™

Additional Information: For HPLC Beilstein: 4186741 CAS: 631-61-8 Chemical Name or Material: Ammonium Acetate Assay: ≥99% Formula Weight: 77.08g/mol Linear Formula: CH3CO2NH4 MDL Number: MFCD00013066 Solubility: Soluble in water 0.1g/mL at 25°C 250GR Ammonium acetate for HPLC, =99.0%

HYDRANAL™ - Water Standard 10.0, Standard for Karl Fischer titration (water content 10 mg/g = 1.0%), Honeywell Fluka™

Chemical Name or Material: HYDRANAL™-Water Standard 10.0 Density: 1.00g/mL at 20°C Flash Point: 32°C (89.6°F) UN Number: UN1993C X6 HYDRANAL -Water Standard 10.0 standard for Karl Fischer titration (water content 10 mg/g =

Hydrochloric Acid Solution, Volumetric, 6M HCl (6N), Honeywell™ Fluka™

1LT Hydrochloric acid solution volumetric, 6 M HCl (6N)

HYDRANAL™ - Coulomat AG-Oven, Reagent for coulometric KF titration with oven (anolyte solution), for cells with and without diaphragm, Honeywell Fluka

CAS Max %: <30.0000% CAS Min %: ≥5.0000% CAS Min %: ≥20.0000% Density: 0.980 g/cm3 Boiling Point: 64°C CAS Min %: ≥5.0000% CAS Max %: <10.0000% CAS Max %: <10.0000% CAS Min %: ≥50.0000% Purity Grade: Karl Fischer titration CAS: 288-32-4 CAS: 67-56-1 CAS: 111-42-2 CAS: 57-55-6 Flash Point: 13°C CAS: 7446-09-5 Chemical Name or Material: HYDRANAL™ - Coulomat AG-Oven CAS Max %: <70.0000% CAS Max %: <10.0000% CAS: 68007-08-9 Name Note: Reagent for coulometric KF titration with oven (anolyte solution), for cells with and without diaphragm Packaging: Glass Bottle CAS Min %: ≥10.0000% CAS Min %: ≥5.0000% CAS Max %: <20.0000% UN Number: UN1230 X6 HYDRANAL -Coulomat AG-Oven reagent for coulometric KF titration with oven (anolyte solution),

HYDRANAL™ - Water Standard 1.0, Standard for Karl Fischer titration (water content 1 mg/g = 0.1%), verified against NIST SRM 2890 & NMIJ CRM 4222, Honeywell Fluka™

UN Number: UN2222 X6 HYDRANAL -Water Standard 1.0 standard for KarlFischer titration (water content 1 mg/g =

HYDRANAL™ - Water Standard 0.1, Standard for Karl Fischer titration (water content 0.1 mg/g = 0.01%), verified against NIST SRM 2890 & NMIJ CRM 4222, Honeywell Fluka™

UN Number: UN1307 40ML HYDRANAL-Water Standard 0.1 standard for Karl Fischer titration

HYDRANAL™ - Titrant 5, Reagent for volumetric two-component Karl Fischer titration, Honeywell Fluka™

Chemical Name or Material: HYDRANAL™-Titrant 5 Density: 0.85g/mL Flash Point: 11°C (51.8°F) UN Number: UN1230 X6 HYDRANAL -Titrant 5 Reagent for volumetric two-component Karl Fischer titration

HYDRANAL™ - Standard sodium tartrate dihydrate, Standard for Karl Fischer titration (water content ∼15.66%), Honeywell Fluka™

Chemical Name or Material: HYDRANAL™-Standard sodium tartrate dihydrate X6 HYDRANAL -Standard sodium tartrate dihydrate standard for Karl Fischer titration (water

HYDRANAL™ - Composite 5, Reagent for volumetric one-component Karl Fischer titration (methanol free), Honeywell Fluka™

Chemical Name or Material: HYDRANAL™-Composite 5 Density: 1.15g/mL Flash Point: 90°C (194°F) 2.5LT HYDRANAL-Composite 5 Reagent for volumetricone-component Karl Fischer titration

Pumice Stone, Granular, 4 to 6mm, Honeywell™ Fluka™

Color: Grey Odor: Odorless 250GR Pumice stone granular, 4-6 mm

Sodium hydroxide concentrate, For 1 L standard solution, 0.1 M NaOH (0.1 N), Honeywell Fluka™

CAS: 1310-73-2 Chemical Name or Material: Sodium hydroxide concentrate Linear Formula: NaOH MDL Number: MFCD00003548 Packaging: Ampoule UN Number: UN1824 Vapor Pressure: 3 mmHg (37°C) X6 Sodium hydroxide concentrate for 1 L standard solution, 0.1 M NaOH (0.1 N)

Karl-Fischer reagent, Honeywell™

1LT Karl-Fischer reagent for pyridine-based volumetric one-component KF titration

Cesium Chloride Lanthanum Chloride Buffer, Honeywell™ Fluka™

Density: 1.17g/mL at 20°C MDL Number: MFCD00152971 500ML Cesium chloride Lanthanum chloride buffer for flame atomic absorption spectrometry, buffer

Sulfuric Acid, 95 to 98%, ACS Reagent, Honeywell™

1LT Sulfuric acid ACS reagent, 95.0-98.0%

HYDRANAL™ - Coulomat AG, Reagent for coulometric KF titration (anolyte solution), for cells with and without diaphragm, Honeywell Fluka™

Chemical Name or Material: HYDRANAL™-Coulomat AG Flash Point: 14°C (57.2°F) UN Number: UN1230 X6 HYDRANAL -Coulomat AG reagent for coulometric KF titration (anolyte solution), for cells with

Hydrochloric Acid Solution, 4M in H2O, Honeywell™

1LT Hydrochloric acid solution 4 M HCl in H2O

HYDRANAL™ - Methanol dry, Reagent for volumetric one-component KF titration (working medium), Honeywell Fluka™

Chemical Name or Material: HYDRANAL™-Methanol dry Density: 0.79g/mL Flash Point: 9°C (48.2°F) UN Number: UN1230 X6 HYDRANAL -Methanol dry reagent for volumetric one-component KF titration (working medium)

HYDRANAL™ - Coulomat CG, Reagent for coulometric KF titration (catholyte solution), Honeywell Fluka™

Chemical Name or Material: HYDRANAL™-Coulomat CG Quantity: 50mL Flash Point: 14°C (57.2°F) UN Number: UN1230 X6 HYDRANAL -Coulomat CG reagent for coulometric KF titration (catholyte solution)

Sodium Hydroxide Concentrate, for 1M solution, Honeywell Fluka™

CAS: 1310-73-2 Chemical Name or Material: Sodium hydroxide concentrate Formula Weight: 40g/mol Quantity: 1 pc/ pk. Linear Formula: NaOH MDL Number: MFCD00003548 UN Number: UN1824 Vapor Pressure: 3 mmHg (37°C) X6 Sodium hydroxide concentrate for 2L standard solution, 1 M NaOH (1N)

2′,5′-Dihydroxyacetophenone, ≥99.5%, Honeywell™ Fluka™

Assay: ≥99.5% Formula Weight: 152.15g/mol Chemical Name or Material: 2′,5′-Dihydroxyacetophenone CAS: 490-78-8 Beilstein: 637903 MDL Number: MFCD00002343 UN Number: NONH for all modes of transport 1GR 2',5'-Dihydroxyacetophenone matrix substance for MALDI-MS, =99.5%

HYDRANAL™ - Coulomat AK, Reagent for coulometric KF titration in ketones (anolyte solution), preferred for cells with diaphragm, Honeywell Fluka

CAS Max %: <30.0000% CAS Min %: ≥1.0000% CAS Min %: ≥20.0000% Density: 1.200 g/cm3 Boiling Point: 60°C CAS Min %: ≥5.0000% CAS Max %: <5.0000% CAS Max %: <5.0000% CAS Min %: ≥30.0000% Purity Grade: Karl Fischer titration CAS: 101023-55-6 CAS: 109-86-4 CAS: 75-89-8 CAS: 67-66-3 Flash Point: 32°C CAS: 68007-08-9 Chemical Name or Material: HYDRANAL™ - Coulomat AK CAS Max %: <50.0000% CAS Max %: <10.0000% CAS: 7446-09-5 Name Note: Reagent for coulometric KF titration in ketones (anolyte solution), preferred for cells with diaphragm Packaging: Glass Bottle CAS Min %: ≥10.0000% CAS Min %: ≥1.0000% CAS Max %: <20.0000% UN Number: UN1992 X6 HYDRANAL -Coulomat AK reagent for coulometric KF titration in ketones (anolyte solution),

Sodium Acetate Trihydrate, ACS Reagent, Honeywell Fluka™

Beilstein: 3732037 CAS: 6131-90-4 Chemical Name or Material: Sodium Acetate Trihydrate Assay: ≥99% Formula Weight: 136.08g/mol Purity Grade: ACS Reagent Ignition Point: 1112°F Linear Formula: CH3COONa · 3H2O MDL Number: MFCD00071557 UN Number: NONH for all modes of transport 25GR Sodium acetate trihydrate ACS reagent, =99%

HYDRANAL™ - Coulomat AG-H, Reagent for coulometric KF titration in long-chained hydrocarbons (anolyte solution), for cells with and without diaphragm, Honeywell Fluka™

Chemical Name or Material: HYDRANAL™-Coulomat AG-H Quantity: 500mL Flash Point: 11°C (51.8°F) UN Number: UN1992 2.5LT HYDRANAL-Coulomat AG-H reagent for coulometric KF titration in long-chained hydrocarbons

HYDRANAL™ - Buffer Acid, Buffer substance for KF titration, Honeywell Fluka™

500ML HYDRANAL-Buffer Acid Buffer substance for KF titration

Hydrochloric acid, TraceSELECT&trade, Honeywell™

500ML Hydrochloric acid =37%, TraceSELECT, for trace analysis, fuming

Sodium hydroxide, Puriss. p.a., ACS Reagent, Reag. Ph. Eur., K ≤0.02%, ≥98%, pellets, Honeywell Fluka™

CAS: 1310-73-2 Chemical Name or Material: Sodium Hydroxide Assay: ≥98% Formula Weight: 40g/mol Purity Grade: puriss. p.a. ACS Reagent Linear Formula: NaOH MDL Number: MFCD00003548 Name Note: Reag. Ph. Eur. Solubility: Soluble in water, 1260g/L at 20°C UN Number: 1823 Vapor Density: >1 (vs air) Vapor Pressure: 18mmHg (20°C), 3mmHg (37°C) X4 Sodium hydroxide puriss. p.a., ACS reagent, reag. Ph. Eur., K 0.02%,

HYDRANAL™ - Formamide dry, Solvent for KF titration, Honeywell Fluka™

Beilstein: 505995 CAS: 75-12-7 MDL Number: MFCD00007941 X6 HYDRANAL -Formamide dry Solvent for KF titration

1,10-Phenanthroline Hydrochloride Monohydrate,99.5 to 102% (calc. on dry substance), Honeywell™ Fluka™

Name Note: Reag. Ph. Eur. Molecular Formula: C12H8N2 · HCl · H2O MDL Number: MFCD00150061 UN Number: UN2811 Assay: 99.5 to 102% (calc. on dry substance) Formula Weight: 234.68g/mol Chemical Name or Material: 1,10-Phenanthroline Hydrochloride Monohydrate CAS: 18851-33-7 Beilstein: 4007967 Melting Point: 224° to 225°C 10GR 1,10-Phenanthroline hydrochloride monohydrate Reag. Ph. Eur., for spectrophotometric det.,

Sodium thiosulfate concentrate, For 1L standard solution, 0.1 M Na2S2O3 (0.1N), Honeywell Fluka™

Chemical Name or Material: Sodium thiosulfate concentrate MDL Number: MFCD00003499 Packaging: Ampoule UN Number: NONH for all modes of transport X6 Sodium thiosulfate concentrate for 1L standardsolution, 0.1 M Na2S2O3 (0.1N)

HYDRANAL™-Water Standard KF-Oven, 140-160°C, Honeywell™

10GR HYDRANAL-Water Standard KF-Oven, 140-160oC standard for Karl Fischer oven check

  spinner

1 – 30 of  Products
Resources