Cover the wide range of electrophoresis and blotting applications. Designed for performance, EPS Power Supplies can be relied on for security and reproducibility POWER SUPPLY GE HEALTHCARE EPS 301 120-240V 50-60Hz 5 to 300V, 80W max

Component of DryEase Mini-Gel Drying System Dryease precut cello 00The DryEase® Mini-Gel Drying System is a simple,

Easy-to-use casters GEL CASTER GE HEALTHCARE MIGHTY SMALL DUAL, 100MMx 105mm gel plates (80614650)

For easy and accurate loading of samples LOADING TIP FLAT SEQGEL 00

For use with SE 260 vertical electrophoresis unit X2 Spacer length 10.5cm, for HOE-200-020L and

Paper electrode wick for electrophoresis X240 Paper electrode for use with Ettan(TM) IPGpho

Universal thumbscrews for 8cm and 16cm clamp assemblies X12 Clamp thumbscrew universal can be used for

Built-in heat exchanger maintains temperature between 1° and 45°C (33.8° and 113°F) for faster runs with superior quality results Standard Dual Cooled vertical gel unit,SE600 complete,18x16cm or 18x8cm gels,1.5mm spacers/combs

Quickly and easily run up to two Novex 8 x 8cm minigels, leak-free without any clamps or grease Surelock Xcell 00

0.25 OZ GEL SEAL, TUBE 0.25OUNCE STORE AT AMBIENT

Accepts gels up to 10 × 10.5cm, increasing separation length by more than 20% over conventional 10 × 8cm gels Mini Vertical Electrophoresis system, miniVE, gelsize 10x10.5cm or 10x8cm, 1mm comb/spacers

Performs 1-D and 2-D electrophoresis and electrotransfer in single compact unit VERTICAL ELECTROPHORESIS SYSTEM MINIVE COMPLETEincludes glass plates, notchedplates, gel modules

Notched glass plates for miniVE gel electrophoresis system X5 Notched glass plates 10x10cm

Universal thumbscrews for 8cm and 16cm clamp assemblies X12 CLAMP THUMBSCREWS

Made from plastics that are highly resistant to acids, bases, and all commonly used buffer systems Comb 28 well, 1.0mm thick for SE660/SE600X/SE600/SE640/SE410/SE400

Small format and efficient cooling for rapid screening of protein and nucleic acid samples Gel tank kit SE 260 mini-vertical unit, for twoslab gels complete

X4 Sponge Foam For Hoe-600-010F Gel Size 9Cm X for TE254

Use with the SE 250 vertical electrophoresis unit. Hoefer™ SE 250 Vertical Electrophoresis Unit Accessory, Plates come in a variety of styles for particular needs. Glasplatten mit Kerbe 8X10cm (VE=5Stck.)

Clamp Assembly for SE 400 and SE 600 Series Units and SE 6015 Gel Caster X2 Clamp assemblies 16cm (pack of 2)

GASKET BLANK SILICONE RUBBER FOR CASTING STAND

Used to transfer proteins with the iBlot Gel Transfer Device 1 SET IBLOT TRANSFER STACKS, PVDF, REGULAR 10BLOTSDDNSA days 90, CDNSA days 60 Special storage

Sealing Gasket for SE 245 Dual Gel Caster X2 SEALING GASKET FOR SE245

Accessory parts for SE 600 Chroma SE 600 Standard or SE 400 Vertical Electrophoresis Units X2 Spacer length 16cm width 2cm thickness 1.5mm(pack of 2)

iBlot Transfer Stacks are used to transfer proteins IBLOT TRANSFER STACKS REG 3X

Combine the advantages of a small format and efficient cooling for rapid screening of protein and nucleic acids Vertical gel tank Mighty Small II mini, 10 x 8cm complete with 1.0mm combs/spacers/plates

Safe, economical unit requires minimal current and only about 1L of buffer Mighty small transfer tank, up to four 9x10cm gels

A complete protein separation-to-western blot solution by combining a Bolt Welcome Pack A with the iBlot 2 Gel Transfer Device and iBlot 2 Transfer Stack (nitrocellulose, regular size) in lieu of one box of Bolt gels Bolt Welcome Pack + iBlot 2 System

For use with TurboBlotter Kits REC TURBO NYTRAN SPC 0,45µ 11X14CM

Made from plastics that are highly resistant to acids, bases, and all commonly used buffer systems Comb, 15 well, 0.75mm thick for SE250/260/300

VacuGene XL vacuum blotting system is the choice for nucleic acid blotting. X5 Masks, vacugene ,XL, plastic