Cytiva miniVE Vertical Electrophoresis System

Description

• Performs two second-dimension separations using 7cm IPG strips in 1.5 hr.
• Runs two mini-gels or four mini-blots at once, using 10 × 10.5cm gel cassettes for increased separation distances
• Completes semi-wet blotting in 45 min. with only 300mL buffer
• Casts, runs, and blots mini-gels in four streamlined components: gel module, blot module, lower buffer chamber and safety lid

• Modular
• Uniform gel temperature is maintained with tank-style lower buffer chamber
• Full tank stabilizes temperature so that lanes are straight and bands are flat
• Blot Module will accept two gel/membrane stacks simultaneously
• Lower buffer chamber is designed to hold two Blot Modules, allowing four gels to be blotted at once

• Gel module is simultaneously a casting stand and an upper buffer chamber with integrated clamps
• Assembles gel sandwich of plates and spacers, clamps it onto upper buffer chamber, then pivot sealing gasket and cast gel
• After polymerization, release bottom seal and drop assembly into tank for running

• Handles gel cassettes up to 10 × 10.5cm (W × H), which increases separation length by more than 30% over conventional 10 × 8 cm gels
• Compatible with glass plates, combs, and spacers of SE 260 Mini-Vertical units
• For gradient gels, mini-Vertical Gel Casters can produce up to four identical gels at one time

• EPS 301 power supply
• 300V, 400 mAmp
• 600VAC (electrophoresis)
• For faster transfers use EPS 2A200

• Operating temperature: 5° to 75°C
• Tank volume: 1.7L with one module in place and 1.2L with two modules in place

Order Info

Weight: 1.15kg (2.53 lb.)