Clamps, Stands and Supports

Fisherbrand™ Zinc Alloy Bossheads

For securely keeping clamps in place on laboratory scaffolding. Fisherbrand™ Zinc Alloy Bossheads come with plated clamping screws with plastic heads. X5 Bosshead zinc alloy for rods to 16mm diameter with plastic headed clamping screw (pack of 5)

R&L Enterprises™ A-Shaped Retort Stand Base

An excellent option for supporting retort stands in the laboratory. R&L Enterprises™ A-Shaped Retort Stand Bases are manufactured from cast iron with a chemically resistant blue acrylic paint.
Base retort stand a shape cast iron blue leg length 200mm, max width between legs 160mm

Azlon™ PTFE Sleeves

Fabricated from pure PTFE for superior chemical, corrosion and contamination resistance, high thermal stability and good flexural properties. Azlon™ PTFE Sleeves form a grease-free gas tight seal for ground glass joints. Available in standard joint sizes for accurate fit. X10 Sleeve disposable PTFE 14/23 B

Fisherbrand™ Three-Way Swivel Scaffolding Connectors

Used for fixing three rods or tubes mutually at right angles. Fisherbrand™ Three-Way Swivel Scaffolding Connectors can be tightened by hand. Connector scaffolding 3 way diecast aluminium alloy 6mm to 13mm diameter rod fisherbrand

Fisherbrand™ Laboratory Jacks

Provides for precise height adjustment with the turn of a knob. Fisherbrand™ Laboratory Jacks are manufactured from aluminum alloy with a lifting screw in stainless steel. Labjack,fisherbrand,aluminium

R&L Enterprises™ Retort Stand Clamps

Enables articles from 2 to 90mm in diameter to be clamped securely. R&L Enterprises™ Retort Stand Clamps feature aluminum alloy jaws with other parts of plated brass.
Clamp 4 jaw

Fisherbrand™ Retort Stand Base

Get optimum results using this acid resistant textured acrylic remote stand. Fisherbrand™ Retort Base Stands, are one of the most widely used instruments in experiments. Base 6890 retort stand, rectangular, single hole M10 thread pressed steel without rod

R&L Enterprises™ Bossheads

For securely keeping clamps in place on laboratory scaffolding. R&L Enterprises™ Bossheads come with offset jaws for greater strength. Bossehead 16mm

Bochem™ 18/10 Stainless Steel Cross Type Boss heads

Certified DIN 12895. Bochem™ 18/10 Stainless Steel Cross Type Boss heads comes in three types. SS BOSSHEADS FOR 16,5 MM

Fisherbrand™ PTFE Thin Wall Sleeve, B-length for Europe

Inserts between standard ground glass joints to eliminate the use of grease. Fisherbrand™ PTFE Thin Wall Sleeve, B-length for Europe is suitable for low or medium vacuum. X10 Fisherbrand PTFE Thin Wall Sleeve, Medium Length B Type Joint 12/21

Bel-Art™ SP Scienceware™ Round Lead Ring Flask Weights with Vikem™ Vinyl Coating

Protects and stabilizes expensive glassware. SP Scienceware™ Round Lead Ring Flask Weights with Vikem™ Vinyl Coating reduces floating, breakage and chemical spills. Lead ring for Erlenmeyer flasks 125-500 ml

Bochem™ 18/10 Stainless Steel Bisshead

Support the M10 base with Bochem™18/10 stainless steel.stand base. BOSSHEAD STAINLESS STEEL 18/10rods up to 16 mm

IKA™ C 26 Prep Stand

C 26 Prep Stand 1 x 3386000 1 x 2437700 1 x 337200

Thermo Scientific™ Heraguard™ ECO Clean Bench Floor Stands

Choose from fixed, manual and electrically adjustable floor stands for the Thermo Scientific™ Heraguard™ ECO clean bench. FLOOR STAND ADJUSTABLE 1500MM(h) 750mm to950mm working height in 50mm increment

R&L Enterprises™ Bright Stainless Steel Rods

An excellent option for the construction of retort stands in the laboratory. R&L Enterprises™ Bright Stainless Steel Rods are durable and corrosion resistant. Rod ss 750x12,5mm

Fisherbrand™ Connecting Sleeve

Scaffolding connector

Cole-Parmer™ Cole-Parmer™ Celcon™ Ratchet Tubing Clamps

Use these durable plastic clamps with flexible tubing. Cole-Parmer™ Celcon™ Ratchet Tubing Clamps won't rust, corrode or distort. X25 Ratchet Tubing Clamps

Fisherbrand™ Bossheads

For securely keeping clamps in place on laboratory scaffolding. R&L Enterprises™ Bossheads come with offset jaws for greater strength.
Bossehead up to 16mm

Bel-Art™ SP Scienceware™ Acetal Plastic Screw Clamp

Complete ON/OFF and fine control with enough accuracy to replace stopcocks in many applications screw clamp 0-14mm

Quickfit™ Expansion Socket Adapter

Made of borosilicate glass. Connects large sized ground glass joints with smaller sized ones.  with the QuickFitTM expansion socket adaptor. X2 Expansion adapter expansion borosilicate glass19/26 socket 14/23 cone

Bochem™ 18/10 Stainless Steel Boss heads

SS BOSSHEAD 8-27MM 90+180°

Cole-Parmer™ Two-Prong Swivel Clamp, single adjustment, medium, nickel-plated zinc

Designed to securely hold a large variety of glassware and apparatus. Cole-Parmer™ Two-Pronged Swivel Clamps, are ideal for cylindrical-shaped labware. ROTATIVE 2 FINGER CLAMP

Erlab™ Captair Smart Glass Work Surface with Retention Tray

Erlab™ Captair Smart Work Surface with Retention Tray is designed to be used with the range of Captair Smart Ductless Filtering Fume Hoods. SMART483 RETENTION TRAY+WORKSURFACE N°1

Bel-Art™ SP Scienceware™ Poly-Jaque™ Lab Jack

The smooth, easy-to-clean top plate supports gradient makers, hot plates, flasks, beakers, baths and other lab items up to ten times its own weight POLYCARBONATE LABJACK

Bel-Art™ SP Scienceware™ Vinyl-Coated Lead Rings

Stabilizes expensive glassware. Bel Art™ SP Scienceware™ Vinyl-Coated Lead Rings will not scratch flasks. FLASK STABALIZING CLOSED LEADRING 19X51MM I,D. XO.D. Fits cylinder 5-10ml

Nickel Electro™ Mild Steel Retort Rods

Structurally strong and resistant to clamp compression scars, these mild steel retort rods are ideal in laboratory and other environments. Retort rod mild steel 10mm x 500mm

R&L Enterprises™ Retort Stand Clamps

Enables articles from 2 to 90mm in diameter to be clamped securely. R&L Enterprises™ Retort Stand Clamps feature aluminum alloy jaws with other parts of plated brass. X5 Heavy charge clamp

Fisherbrand™ Three-Way Swivel Scaffolding Connectors

Used for fixing three rods or tubes mutually at right angles. Fisherbrand™ Three-Way Swivel Scaffolding Connectors can be tightened by hand. 3 RODS BOSSEHEAD 0-13MM

  spinner