Separates solid and liquid phases of waste samples HAZARDOUS WASTE FILTRATION SYSTEM 142MM

Filter water and other beverages.  Microfil™ V Filtration Device is a sterile filter that can contain 100mL. X24 Microfil V unit +pre-assembled 0.22µm 47mm white gridded membrane (cellulose esters), sterile

Transfer sterile media aseptically from large containers to small media bottles or culture vessels using the Thermo Scientifc™ Nalgene™ Polycarbonate Filling Bell. FILLING BELL PC

Includes 300mL funnel, fritted base and cap, clamp, and alignment sleeve. Glass Vacuum Filter Holders, 47mm are used in vacuum filtration of liquids to produce clarified or particulate-free filtrate or to analyze particulate or biological contamination retained on the filter surface. Glass filter holder assembly, stainless steel screen, with 300 mL funnel, base, stopper, clamp, alig

Designed to replace parts contained in glass vacuum filtration kits or provide for an alternative configuration 47mm Funnel Alignment Guide 5 / Pack

Vacuum filter small volumes for particulate or biological contamination analysis. Glass Filter Holder, 25mm, SS Support

Cannot pressurize unless completely assembled, assuring safe operation ZHE HAZARDOUS WASTE FILTRATION SYSTEM 90MM

Designed to handle small volumes of liquids for analysis of particulate or microbiological contamination 15ML GLASS FILTRATION SYSTEM 25MM

Designed to replace parts contained in glass vacuum filtration kits or provide for an alternative configuration Vacuum Glass Base And Cap, 47mm

Plastic adapter with stainless steel inserts Y-distributor piece (for 2 holders),

Use this bulk-packed version of funnel adapters included with 145- and 147-series analytical test filter funnels in high throughput QC testing laboratories. X25 145 FUN ADP,BK

Replace #7 or #8 stoppers in any manifold or filtering flask with the Thermo Scientific™ Nalgene™ Vacuum Gasket for Filter Funnels. X6 TPE REDUCER 28 - 40 MM

Used for general filtration and is designed to handle up to 500mL of sample liquids for the analysis of particulate or microbiological contamination FUNNEL 300ML WITH GLASS FRIT 47MM

Used for autoclaving with the filter in place and is designed to handle up to 500mL of sample liquids for the analysis of particulate or microbiological contamination 300ML GLASS FILTRATION UNIT 47MM

For ultra-ware microfiltration assembly with stainless steel support STAINLESS STEEL FRIT FOR 5292F

Presterilized, ready-to-use funnels and filter membranes X150 Microfil 250ml funnel + 0.45µm 47mm white gridded S-Pak membrane (mixed ester cellulose)

SS MB SUPPORT 47MMVentil, 47 mm

For use with Sterility testing System Filling cap, anodized aluminum,

For use with Sterility testing System SS INLET NEEDLE F/FLASKS

Stopper, No5, 3/8in hole

Process samples from an in-line system or pressure vessel with this stainless steel holder. Cole-Parmer™ Advantec 301900 Pressure Filtration Holders maximize flow rates by applying positive pressure to the fluid over a broad membrane surface. 304 SS FILTER SUPPORT 142MM

Components for Ultra-ware™ microfiltration assembly PTFE FACED FRITTED GLASS SPOORT

Use Kimble™ Microfiltration Assembly Hardware when filtering large volumes of viscous or proteinaceous solutions to give the maximum flow rate. FRITTED GLASS SUPPORT

Converts Ultra-Ware filtration assemblies for inline filtration/degassing applications Pickup adapter Kimble solvent with 1/4 inch O.D.PTFE tubing

BASE WITH 90MM GLASS FRITT

Recommended for routine filtration analysis of corrosive liquids and the removal of particulates from HPLC solvents GLASS FILTRATION SYST. 300ML

Designed to handle up to 500 mL of sample liquids for the analysis of particulate or microbiological contamination GLASS FUNNEL SS FRIT 300ML

Used for routine filtration of corrosive liquids and removal of particles from HPLC solvents GLASS FRIT 40/35

For 90mm filter BASE FOR 90MM SS FRIT

Designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter FUNNEL/SUPPORT ASSY 90MM