Find the right tank to meet your application needs with cylinders ranging in size from 19L to 757L. CYL. TANK W.COVER HDPE 10 GAL.

Develop multiple TLC plates simultaneously. TLC Simultaneous Developing Chambers  come with a choice of room for either 2 or 5 plates. TLC-Separation-Chamber for 2 simultaneous separations, 10 x 10 cm plates

TANK TLC DEVELOPING 10X10

Significantly reduce evaporation and contamination by using these covered, rectangular tanks, which are offered in sizes from 8 to 114L to meet application needs. RECTANGULAR TANK W COV. PP 6GAL.36x25x25cm, 23L

For an economical alternative to stainless steel, choose the Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover. CYLINDRIC TANK LLDPE 114L

Store, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks. BIOTECH CLOSED DOME TANK PCCO 55GASchraubverschluss

Cylindrical glass tanks for the development of 5 × 10cm (2 × 3.9 in. ) and 5 × 20cm (2 × 7.9 in. ) plates Kontes TLC Cylindrical Developing Tanks, Chromatog

Molded glass tanks for development of any size TLC plate up to 20 × 20cm Developing Tank with Latch Lid two 20 x 20cm or

Versatility at a lower cost than stainless-steel tanks. RECTANGULAR TANK W COV HDPE 15GAL.

An economical alternative to stainless steel, the Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot offers excellent resistance to stress cracking. TANK SPIGOT COVER HDPE 17L

For use with Kontes™ rectangular developing tank (K416190-4900) ALUMINUM RACK FOR 14429

Resist stress cracking and increase tolerance to many organic chemicals with this polypropylene tank with Cover, an economic alternative to stainless-steel tanks. TANK,CYLINDRICAL,POLYPROPYLENE WITH COVER 300 X460MM DIAMETER X HT 28 LITRES (11200-0007)

Nalgene Heavy-Duty Cylindrical LLDPE Tanks include a needle-type spigot installed for draw off. Spigot accepts 5/8 inch I.D. tubing. Tanks are offered in sizes from 19 to 208L.

Dispense most liquids, including reagents, distilled water and titrants using these polypropylene copolymer (PPCO) lowboys. They fit into tight spaces and can stack three high. ASPIRATOR POLYPROPYLENE LOWBOYS CAPACITY 15 LITRES(2324-0015)

LOW PROFILE TANK, LDPE 45L

Knob Lid for use with Fungicrom Separating Chambers (TLC). LID FOR TLC TANK 20X20CM

X2 Measuring Cylinders (glass) 2

Designed to rationalize laboratory and small production line organization. Kartell™ Tank with Spigot gives the opportunity to optimize water, aqueous solutions and solvents availability in a reduced space. X5 tanks HDPE with spigot 10 L

19L DIP TANK YELLOW

Fungicrom Separating Chambers (TLC) are to be used with thin layer chropatography. TLC TANK FOR 5 PLATES 20X20CM

4L BENCH CAN W/O BSKT YELLO

Kartell™ HDPE Industrial Tank is useful in everyday laboratory practice and features a comfortable handle with a secure seal-cap following DIN recommendations. X24 industrial tanks HDPE 10 L GL51

BENCH CAN YELLOW (1L)

8L DIP TANK YELLOW

For use with Thin Layer Chromatography. CHAMBER ROLLERPLAK (WITH LID)

stackable tanks HDPE 380x280x200mm 20L

RINSE TANK FLOOR STANDING, WITH FOOT TREADLEsteel yellow83L

Dip tank for cleaning parts and sub assemblieswith HDPE liner steel for chemical resistance

stackable tanks HDPE 560x330x255mm 46L

X4 Development chamber 4