Develop multiple TLC plates simultaneously. TLC Simultaneous Developing Chambers  come with a choice of room for either 2 or 5 plates. TLC-Separation-Chamber for 2 simultaneous separations, 10 x 10 cm plates

Nalgene Heavy-Duty Cylindrical LLDPE Tanks include a needle-type spigot installed for draw off. Spigot accepts 5/8 inch I.D. tubing. Tanks are offered in sizes from 19 to 208L.

Resist stress cracking and increase tolerance to many organic chemicals with this polypropylene tank with Cover, an economic alternative to stainless-steel tanks. TANK,CYLINDRICAL,POLYPROPYLENE WITH COVER 460 X760MM DIAMETER X HT.114 LITRES (11200-0030)

TANK TLC DEVELOPING 10X10

Find the right tank to meet your application needs with cylinders ranging in size from 19L to 757L. CYL. TANK W. COVER HDPE 15 GAL.

Versatility at a lower cost than stainless-steel tanks. RECTANGULAR TANK W COV. HDPE 7GAL.

An economical alternative to stainless steel, the Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot offers excellent resistance to stress cracking. TANK SPIGOT COVER 26L HDPE

For an economical alternative to stainless steel, choose the Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover. TANK ZYLINDRISCH, 208L LLDPE MIT DECKEL, GRADUIERT

Significantly reduce evaporation and contamination by using these covered, rectangular tanks, which are offered in sizes from 8 to 114L to meet application needs. RECTANGULAR TANK W COV. PP 11GAL.

Dispense most liquids, including reagents, distilled water and titrants using these polypropylene copolymer (PPCO) lowboys. They fit into tight spaces and can stack three high. ASPIRATOR POLYPROPYLENE LOWBOYS CAPACITY 8 LITRES(2324-0008)

Store, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks. BIOTECH CLOSED DOME TANK PPCO 100GSchraubverschluss

LOW PROFILE TANK, LDPE 45L

stackable tanks HDPE 380x280x200mm 20L

X2 Measuring Cylinders (glass) 2

4L BENCH CAN W/O BSKT YELLO

Designed to rationalize laboratory and small production line organization. Kartell™ Tank with Spigot gives the opportunity to optimize water, aqueous solutions and solvents availability in a reduced space. X5 tanks HDPE with spigot 10 L

RINSE TANK FLOOR STANDING, WITH FOOT TREADLEsteel yellow83L

The LDPE Mixing/Dosing Container close completely tight. They have thick sides, they are seamless, impact resistant and stressfree sintered. The wide-necked opening enables safe filling. 200L LDPE CONTAINER

X1 TLC Micro Set A

19L DIP TANK YELLOW

4L DIP TANK YELLOW

Dip tank for cleaning parts and sub assemblieswith HDPE liner steel for chemical resistance

stackable tanks HDPE 560x330x255mm 46L

Constructed of high density polyethylene, making it good for packaging and transporting liquids in the food industry. Kartell™ Spigot for Tank facilitates easy use by allowing the tank to be in a position to stand. X2 tap for tanks 1770 and 1771

Kartell™ HDPE Industrial Tank is useful in everyday laboratory practice and features a comfortable handle with a secure seal-cap following DIN recommendations. X24 industrial tanks HDPE 10 L GL51

BENCH CAN YELLOW (1L)

X4 Development chamber 4